FL-SS SERIES
All Lift Cranes® Stainless Steel Foundationless Floor Mounted FL1000-SS Stainless Steel Jib Cranes have a ½ ton capacity and do not require a pre-poured foundation. The FL1000-SS Stainless Steel Jib Cranes can be bolted to almost any existing concrete surface and are great in open areas where they can serve several work stations. Durable and long lasting, these overhead floor cranes feature a 360° rotating, rolled steel I-beam section with tapered flange for smooth trolley travel and removable safety end stops to ensure a limit to trolley travel. All FL1000-SS Jib Cranes have either a 30” diameter base and 26” bolt circle with 12 holes measuring 1¼“each or a 36” diameter base and 32” bolt circle with 12 holes measuring 1¼“each.
Application
Machining and assembly operations, outdoor use such as loading docks, and in conjunction with other jib cranes to provide staged coverage are just a few applications for this Foundationless Jib Crane.
Lift Height
- Min. 8’
- Max. 12’
Span
- Min. 6’
- Max. 14’
Additional Options
- Stainless Steel Tagline Kits with S-Hooks
- Rotation Stops
- Stainless Steel Epoxy Anchor Kits
- Bolt Pattern Templates
- Hoist and Trolleys
- Top Entry Collector Ring
Installation Requirements
- Existing concrete must be a minimum of 6” thick reinforced with a minimum 3,000 psi (5 bag mix), soil pressure must support 2,500 psi.
- Concrete in and around the area, 6’ x 6’ square, of the base plate must be free of cracks, seams, joints, walls, delamination and must appear in good condition.
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | FL186-SS | 8′ | 6′ | 6″ | 4″ | 30″ | 598 # |
| 1,000 | FL188-SS | 8′ | 8′ | 6″ | 4″ | 30″ | 630 # |
| 1,000 | FL1810-SS | 8′ | 10′ | 8″ | 5 ¼” | 30″ | 827 # |
| 1,000 | FL1812-SS | 8′ | 12′ | 8″ | 5 ¼” | 30″ | 911 # |
| 1,000 | FL1814-SS | 8′ | 14′ | 8″ | 5 ¼” | 36″ | 1,019 # |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | FL1106-SS | 10′ | 6′ | 6″ | 4″ | 30″ | 642 # |
| 1,000 | FL1108-SS | 10′ | 8′ | 6″ | 4″ | 30″ | 674 # |
| 1,000 | FL11010-SS | 10′ | 10′ | 8″ | 5 ¼” | 30″ | 884 # |
| 1,000 | FL11012-SS | 10′ | 12′ | 8″ | 5 ¼” | 30″ | 968 # |
| 1,000 | FL11014-SS | 10′ | 14′ | 8″ | 5 ¼” | 36″ | 1,075 # |
| CAPACITY LBS |
MODEL # | HUB | SPAN | BEAM HEIGHT |
FLANGE WIDTH |
BASE DIA |
UNIT WEIGHT |
| 1,000 | FL1126-SS | 12′ | 6′ | 6″ | 4″ | 30″ | 687 # |
| 1,000 | FL1128-SS | 12′ | 8′ | 6″ | 4″ | 30″ | 719 # |
| 1,000 | FL11210-SS | 12′ | 10′ | 8″ | 5 ¼” | 30″ | 940 # |
| 1,000 | FL11212-SS | 12′ | 12′ | 8″ | 5 ¼” | 30″ | 1,024 # |
| 1,000 | FL11214-SS | 12′ | 14′ | 8″ | 5 ¼” | 36″ | 1,131 # |
NOTES:
- All Foundations should be checked by a Local Engineer
DEFINITION OF TERMS:
- Top Entry Collector Ring (Holds electric power cord in order to allow for a smooth, uninterrupted 360° rotation of Jib)
- HUB (height under beam)
- Span (length from column center to the end of the beam)
